Heading into 2027, the Chicago suburbs with the lowest property taxes for industrial tenants are generally in the collar counties, especially towns with large commercial tax bases, while industrial buildings in suburban Cook County usually carry the highest taxes unless they have a Cook County incentive. In the Civic Federation’s most recent published estimates, for tax year 2022, effective tax rates on all property ranged from about 1.1 to 2.7 percent of market value in selected collar county towns, led by Oak Brook at 1.09 percent, Lake Forest at 1.68 percent, and Naperville at 1.81 percent. Industrial property in selected north and northwest Cook County suburbs paid about 4.3 to 5.7 percent. A Cook County Class 6b incentive can cut that gap sharply for qualifying buildings. In 2027, watch two reassessments: Lake County, Illinois begins a new four-year general reassessment, and Cook County reassesses the City of Chicago. Taxes vary building by building, so compare the actual tax per square foot of each building you consider.

This article is general information, not tax advice. Rates change every year and vary within each town by school and park district.

Latest published estimated effective tax rates: Oak Brook 1.09%, Lake Forest 1.68%, Naperville 1.81%, Aurora 2.25%, Waukegan 2.62%, and Cook County industrial in Glenview 4.29%, Elk Grove Village 4.99%, Schaumburg 5.55%, and Elgin 5.72%Estimated effective property tax rates

An effective tax rate is the tax bill as a share of a property’s market value. The Civic Federation estimates them for selected towns. Collar county figures cover all property types, because those counties assess everything at the same level. Cook County figures shown here are for industrial property, which Cook assesses at a higher level than homes.

Area Town Estimated effective rate, tax year 2022
DuPage County Oak Brook 1.09%
Lake County, Illinois Lake Forest 1.68%
DuPage County Naperville 1.81%
Will County Peotone 1.83%
Kane County Aurora 2.25%
Will County Romeoville and Joliet 2.54%
Lake County, Illinois Waukegan 2.62%
Lake County, Illinois Buffalo Grove 2.72%
Cook County, industrial Glenview 4.29%
Cook County, industrial Elk Grove Village 4.99%
Cook County, industrial Arlington Heights 5.40%
Cook County, industrial Schaumburg 5.55%
Cook County, industrial Elgin 5.72%

Source: Civic Federation, Estimated Effective Property Tax Rates 2013 to 2022. The study covers selected towns only. Industrial estimates were available only for north and northwest Cook County towns, and many towns, including Vernon Hills, Libertyville, Gurnee, and Northbrook, are not in the study.

What changes in 2027 for industrial property taxes: Lake County, Illinois begins a new four-year reassessment, north and northwest Cook carries 2025 values, south and west Cook’s 2026 reassessment reaches bills, and the City of Chicago is reassessedWhy Cook County industrial costs more

Cook County assesses industrial and commercial property at 25 percent of market value and homes at 10 percent, so industrial buildings carry a larger share of each town’s tax levy. The collar counties, including Lake, DuPage, Kane, Will, and McHenry, assess all non-farm property at one-third, so industrial and residential property are taxed on the same share of value. See Cook County vs. Lake County property taxes.

How Class 6b changes the math

Cook County’s Class 6b incentive lowers the assessment level for qualifying new, substantially rehabilitated, or reoccupied industrial property to 10 percent for the first 10 years, then 15 percent in year 11 and 20 percent in year 12. At 10 percent instead of 25 percent, a building’s tax falls to roughly 40 percent of what it would otherwise be. As an illustration, an Elk Grove Village industrial building at about a 5 percent effective rate would fall to roughly 2 percent, in line with many collar county towns. Ask whether a building has an incentive, how many years remain, and whether your use keeps it eligible.

What changes in 2027

  • Bills paid in 2027 are for tax year 2026. Illinois taxes are paid a year in arrears, so the bills tenants see passed through in 2027 reflect 2026 assessments and tax rates.
  • Lake County, Illinois general reassessment. Lake County reassesses all property every four years, and 2027 begins a new cycle. New values will show up in bills paid in 2028, so tenants signing multi-year net leases in 2027 should budget for a change.
  • North and northwest Cook suburbs. These were reassessed in 2025, and those values carry through 2027. The Cook County Assessor reported that appeals cut commercial values by 14 percent in the 2025 cycle, compared with 20 percent in 2022, which means commercial and industrial property kept more of its assessed value.
  • South and west Cook suburbs. Reassessed in 2026, with higher or lower values showing up in bills paid in 2027.
  • City of Chicago. Reassessed in 2027.
  • Incentive expirations. Any Cook County Class 6b incentive in its final years steps up to 15 and then 20 percent before returning to 25 percent. Check where each building is in its schedule.

What else affects your tax bill

  • School and park districts. Two buildings in the same town can sit in different tax codes with different rates.
  • Tax base. Towns with large commercial and industrial bases often have lower rates.
  • TIF districts and abatements. Some villages offer abatements or use tax increment financing for industrial areas.
  • Assessment timing. Cook reassesses every three years and Lake County every four, so a recent reassessment can change the bill.
  • Appeals. Landlords who appeal regularly can keep pass-through taxes lower.

How tenants should compare buildings

  1. Ask each landlord for the last three years of actual property taxes per square foot.
  2. Ask about incentives, abatements, and pending appeals, and when any incentive ends.
  3. Add taxes to base rent and other expenses to compare total occupancy cost. See gross lease vs. net lease.
  4. Weigh taxes against labor, access, and rent. A lower-tax town is not cheaper if rent or logistics costs are higher.

Illustration of Cook County Class 6b reducing an Elk Grove Village industrial building’s effective rate from about 5.0 percent to about 2.0 percent, with the 10, 15, and 20 percent scheduleCompare taxes across buildings

A tenant representative can collect tax history for every building on your list and compare total occupancy cost. The Van Vlissingen and Co. industrial team works across Lake County, Illinois, the northern and northwest suburbs, and Southern Wisconsin, on both sides of the Cook County line. For current market conditions, see the daily-updated RFP Chicagoland Commercial Real Estate Index.

Frequently asked questions

Which Chicago suburbs have the lowest property taxes for industrial property in 2027?

Generally collar county towns with large commercial tax bases. In the Civic Federation’s tax year 2022 estimates, Oak Brook, Lake Forest, and Naperville had among the lowest effective rates of the towns studied, about 1.1 to 1.8 percent.

Why are industrial property taxes higher in Cook County?

Cook assesses industrial property at 25 percent of market value and homes at 10 percent, so industrial buildings carry more of the levy. The collar counties assess all property at one-third.

What is Cook County Class 6b?

An incentive that lowers the assessment level for qualifying industrial property to 10 percent for 10 years, then 15 and 20 percent in years 11 and 12, which can cut taxes by more than half.

What property tax changes should industrial tenants expect in 2027?

Lake County, Illinois starts a new four-year general reassessment in 2027, the City of Chicago is reassessed, and bills paid in 2027 reflect tax year 2026, including the 2026 reassessment of the south and west Cook suburbs.

Do industrial tenants pay property taxes?

Usually yes, through a net lease that passes the tenant’s share of taxes through on top of rent.

What is an effective property tax rate?

The annual tax bill as a percentage of a property’s market value. It allows comparison across counties with different assessment systems.

We're Here To Help

This field is for validation purposes and should be left unchanged.
I'd Like To...
Name(Required)
OP IN